2014 FX4...Slowly making progress - Page 73

2014 FX4...Slowly making progress

This is a discussion on 2014 FX4...Slowly making progress within the F150 Ecoboost Builds forums, part of the F150 Ecoboost Forum category; Finally off of break-in oil and onto the regular stuff!...

Page 73 of 87 FirstFirst ... 2363717273747583 ... LastLast
Results 721 to 730 of 862
Like Tree435Likes

Thread: 2014 FX4...Slowly making progress

  1. #721
    Gold Supporting Member Blown F-150's Avatar
    Gold Member

    Join Date
    Feb 2016
    Location
    Calgary AB
    Posts
    1,868
    Member #
    15073
    Liked
    1043 times
    Finally off of break-in oil and onto the regular stuff!
    snakebitten and Boostking like this.

  2. #722
    Gold Supporting Member Blown F-150's Avatar
    Gold Member

    Join Date
    Feb 2016
    Location
    Calgary AB
    Posts
    1,868
    Member #
    15073
    Liked
    1043 times
    I should be able to get a couple of hours into the truck this weekend. I would like to get the gauges in first. Then maybe do the diff cover and fluid.

  3. #723
    Gold Supporting Member sleipnir's Avatar
    Gold Member

    Join Date
    Apr 2018
    Posts
    345
    Member #
    61026
    Liked
    209 times
    Quote Originally Posted by Blown F-150 View Post
    I should be able to get a couple of hours into the truck this weekend. I would like to get the gauges in first. Then maybe do the diff cover and fluid.
    What gauges are you going with? I have a roush gauge I plan to throw in mine
    2012 4x4 Lariat 3.5 || 3.73 with e-locker || Full Race Turbos || Full Race Downpipes || CRP Manifolds || AFE Stage II Intake || AFE Charge Pipe || CPE Intercooler || Tubrosmart BOV || Retrofit Headlights || Tifosi Performance Special Touch || "Secret Sauce" Tuned || MSD Blaster Coil || Racho RS9000XL Rear Shocks || Fox 2.0 Coilovers || Morimoto LED Fogs || More to come

  4. Remove Advertisements
    F150EcoBoost.net
    Advertisements
     

  5. #724
    Gold Supporting Member Blown F-150's Avatar
    Gold Member

    Join Date
    Feb 2016
    Location
    Calgary AB
    Posts
    1,868
    Member #
    15073
    Liked
    1043 times
    Quote Originally Posted by sleipnir View Post
    What gauges are you going with? I have a roush gauge I plan to throw in mine
    I have a auto meter “Cobalt” boost/vac and fuel pressure gauges to go in. Plan is A-pillar mount for now.


    Sent from my iPhone using Tapatalk

  6. #725
    Gold Supporting Member sleipnir's Avatar
    Gold Member

    Join Date
    Apr 2018
    Posts
    345
    Member #
    61026
    Liked
    209 times
    Quote Originally Posted by Blown F-150 View Post

    I have a auto meter “Cobalt” boost/vac and fuel pressure gauges to go in. Plan is A-pillar mount for now.


    Sent from my iPhone using Tapatalk
    Very cool choice. I think it'll tie the outside and the inside together really nice.
    Blown F-150 likes this.
    2012 4x4 Lariat 3.5 || 3.73 with e-locker || Full Race Turbos || Full Race Downpipes || CRP Manifolds || AFE Stage II Intake || AFE Charge Pipe || CPE Intercooler || Tubrosmart BOV || Retrofit Headlights || Tifosi Performance Special Touch || "Secret Sauce" Tuned || MSD Blaster Coil || Racho RS9000XL Rear Shocks || Fox 2.0 Coilovers || Morimoto LED Fogs || More to come

  7. #726
    Ecoboost Veteran Rusty Shackleford's Avatar

    Join Date
    May 2018
    Location
    B.C.
    Posts
    259
    Member #
    62705
    Liked
    107 times
    Do you have a timeline for the dyno?

    I look forward to the dialed in numbers.
    2017 3.5

  8. #727
    Gold Supporting Member Blown F-150's Avatar
    Gold Member

    Join Date
    Feb 2016
    Location
    Calgary AB
    Posts
    1,868
    Member #
    15073
    Liked
    1043 times
    Quote Originally Posted by Rusty Shackleford View Post
    Do you have a timeline for the dyno?

    I look forward to the dialed in numbers.
    The goal would be to hit the Dyno no later than May. Need to make sure I have some warmer weather and time to get it Dailed in. It’s not far off now, but hard to tune in cold weather and expect it all to be good when it warms up.


    Sent from my iPhone using Tapatalk

  9. #728
    Gold Supporting Member Blown F-150's Avatar
    Gold Member

    Join Date
    Feb 2016
    Location
    Calgary AB
    Posts
    1,868
    Member #
    15073
    Liked
    1043 times
    Looking for input guys, keep or scrap the FX4 decal? I'm kind of liking it without, but on the fence. I always thought it broke up the paint a bit, maybe even just drop the "Off Road" bit...



    ford4thot likes this.

  10. #729
    Super Moderator Elmore328's Avatar
    Gold Member

    Join Date
    Jan 2016
    Location
    Cleburne, Texas
    Posts
    4,058
    Member #
    14774
    Liked
    3139 times
    Quote Originally Posted by Blown F-150 View Post
    Looking for input guys, keep or scrap the FX4 decal? I'm kind of liking it without, but on the fence. I always thought it broke up the paint a bit, maybe even just drop the "Off Road" bit...



    Im gonna say "remove the decal"...but what has got me in awe the most, is how much snow fell in the time it took you to pull your truck around to park it facing the opposite direction to snap the second picture.
    Last edited by Elmore328; 03-11-2019 at 12:55 PM.
    -Clark

    2013 Ingot Silver SuperCrew XLT - Texas Edition, 3.5L EcoBoost, 3.31 e-locker, AEM drop-in filter, Self-fabricated grill insert, AVS low-profile vent shades, Falken Wildpeak A/T3W 265/70/18, BakFlip G2 tri-fold bed cover

  11. #730
    Gold Supporting Member Blown F-150's Avatar
    Gold Member

    Join Date
    Feb 2016
    Location
    Calgary AB
    Posts
    1,868
    Member #
    15073
    Liked
    1043 times
    Quote Originally Posted by Elmore328 View Post
    Im gonna say "remove the decal"...but what has got me in awe the most, is how much snow fell in the time it took you to pull your truck around to park it facing the opposite direction to snap the second picture.
    Hence the title of the thread....

Page 73 of 87 FirstFirst ... 2363717273747583 ... LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Making my own intake!
    By shreker in forum F150 Ecoboost Performance
    Replies: 10
    Last Post: 03-27-2016, 08:57 PM
  2. making the switch
    By suukiquadrider2006 in forum Introductions
    Replies: 5
    Last Post: 06-08-2015, 06:59 AM
  3. 2014 FX4 Help...
    By texasfiremn in forum F150 Ecoboost Purchasing
    Replies: 3
    Last Post: 07-20-2014, 09:44 AM
  4. Making some decals
    By BKHDFW in forum Buy/Sale/Trade
    Replies: 48
    Last Post: 05-29-2014, 08:09 PM

Search tags for this page

bkhdfw
,

news

Click on a term to search for related topics.
Connect with us: F150 Ecoboost Forum on Twitter F150 Ecoboost Forum on Facebook F150 Ecoboost Forum RSS Feed
Find us on Google+