F150 Ecoboost Forum banner
1 - 2 of 2 Posts

· Premium Member
Joined
·
5,175 Posts
I'm thinking the reason they're not quite fitting is my Mishimoto radiator being thicker than the stock one. That little bit of room that's taken up makes a difference. Might have to change gears and go with the Mishi pipes and intercooler.
Just to note, I’ve installed CVF, Mishi and AFE pipes. They all are fun to get to fit and I can’t say any one stood out as any easier to deal with.


Sent from my iPhone using Tapatalk
 

· Premium Member
Joined
·
5,175 Posts
what's the secret on getting them to fit? Apparently the cold side won't fit with a stock intercooler and bov.
All the ones I did or helped with had aftermarket intercoolers. Had to cut the hot pipe bracket for the AFE ones. The rest were just twisting and tweaking the couplers to make them work.

The Mishi pipes on my truck were a fight, especially getting the drivers side pipe to line up at the intercooler connection.


Sent from my iPhone using Tapatalk
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top