F150 Ecoboost Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2,341 Posts
If I were you, I would install the factory BPVs. The 11-12 f150s are bit more complex when it comes to the turbos. You’ll notice actually each side has its own solenoid to control the BPV. It’s a mixture between mechanical and electrical operation.

Those kompacts are not designed for the 11-12s. They are meant for vehicles with a straight shot to the intake manifold. Turbosmart just claimed they were compatible as its the same BPV mounting setup on some other vehicles. Far more complex. You can end up destroying your turbos….

If you need to replace the factory BPVs, I can provide you the p/n.
 
1 - 2 of 2 Posts
Top