F150 Ecoboost Forum banner

1 - 20 of 23 Posts

·
Registered
Joined
·
9,641 Posts
Discussion Starter #1
Here's a few pics from my latest project, all in all I'm very pleased with the results. This project was surprisingly simple being that the projectors were a direct bolt in, but removing the lens is still a major PITA. If you have any questions, feel free to ask.

Hella Evo x-r projectors
Morimoto 3five D2S HID system (5,000k)
Morimoto 6 inch white LED strips
Recon switchbacks

ImageUploadedByTapatalk1392745535.962639.jpg ImageUploadedByTapatalk1392745549.267216.jpg ImageUploadedByTapatalk1392745567.101463.jpg ImageUploadedByTapatalk1392745586.435613.jpg ImageUploadedByTapatalk1392745596.786421.jpg ImageUploadedByTapatalk1392745609.031171.jpg ImageUploadedByTapatalk1392745634.308154.jpg ImageUploadedByTapatalk1392745654.389452.jpg ImageUploadedByTapatalk1392745668.751059.jpg ImageUploadedByTapatalk1392745679.662857.jpg ImageUploadedByTapatalk1392745694.075086.jpg ImageUploadedByTapatalk1392745711.587262.jpg ImageUploadedByTapatalk1392745725.688889.jpg
 

·
Registered
Joined
·
1,625 Posts
Now I feel lazy. I've been having my crap for months and haven't done the retrofit. You been in Thailand for months and got yours done. OK I get the message. My project will be more intensive than yours though as nothing I have will be a direct fit. XLT halogens to projector project coming soon. Your finished project looks clean and factory, good job. Are they aligned? Is there a noticeable improvement in the lighting?
 

·
Registered
Joined
·
9,641 Posts
Discussion Starter #3
Now I feel lazy. I've been having my crap for months and haven't done the retrofit. You been in Thailand for months and got yours done. OK I get the message. My project will be more intensive than yours though as nothing I have will be a direct fit. XLT halogens to projector project coming soon. Your finished project looks clean and factory, good job. Are they aligned? Is there a noticeable improvement in the lighting?
I haven't gotten to drive with them at night, since I'm waiting on a harness. But, it looks like they put out a lot more light in the parking lot of my apartment complex.

Everything lined up perfectly.
 

·
Registered
Joined
·
9,641 Posts
Discussion Starter #5
  • Like
Reactions: Nasty Wendy

·
Registered
Joined
·
163 Posts
Tell me what I need to know about switchbacks. I'm wanting to put some in my factory HID headlights. Greatly appreciated!
 

·
Registered
Joined
·
9,641 Posts
Discussion Starter #7
Tell me what I need to know about switchbacks. I'm wanting to put some in my factory HID headlights. Greatly appreciated!
You just need the bulbs and a 60 ohm resistor for each side. Wire the resistor to the wire for the blinker, and the ground the other side to chassis.
 

·
Registered
Joined
·
42 Posts
Here's a few pics from my latest project, all in all I'm very pleased with the results. This project was surprisingly simple being that the projectors were a direct bolt in, but removing the lens is still a major PITA. If you have any questions, feel free to ask. Hella Evo x-r projectors Morimoto 3five D2S HID system (5,000k) Morimoto 6 inch white LED strips Recon switchbacks <img src="http://www.f150ecoboost.net/forum/attachment.php?attachmentid=7741"/><img src="http://www.f150ecoboost.net/forum/attachment.php?attachmentid=7742"/><img src="http://www.f150ecoboost.net/forum/attachment.php?attachmentid=7743"/><img src="http://www.f150ecoboost.net/forum/attachment.php?attachmentid=7744"/><img src="http://www.f150ecoboost.net/forum/attachment.php?attachmentid=7745"/><img src="http://www.f150ecoboost.net/forum/attachment.php?attachmentid=7746"/><img src="http://www.f150ecoboost.net/forum/attachment.php?attachmentid=7747"/><img src="http://www.f150ecoboost.net/forum/attachment.php?attachmentid=7748"/><img src="http://www.f150ecoboost.net/forum/attachment.php?attachmentid=7749"/><img src="http://www.f150ecoboost.net/forum/attachment.php?attachmentid=7750"/><img src="http://www.f150ecoboost.net/forum/attachment.php?attachmentid=7751"/><img src="http://www.f150ecoboost.net/forum/attachment.php?attachmentid=7752"/><img src="http://www.f150ecoboost.net/forum/attachment.php?attachmentid=7753"/>
Looking good man! Hope you can spread some love on this forum for me haha
 

·
Registered
Joined
·
9,641 Posts
Discussion Starter #12
Tuxedo!

Good to see you on here.
 

·
Registered
Joined
·
9,641 Posts
Discussion Starter #15
Your an avid user over here I see and this forum has a few familiar UN's too. Love the LEDs you added on your heads, I'm doing something similar with mine, you'll just have to wait and see!
I spend a lot of time offshore with nothing to do.. Lol

I need to throw some silica packets in my heads.
 

·
Registered
Joined
·
9,641 Posts
Discussion Starter #16

·
Registered
Joined
·
9,641 Posts
Discussion Starter #19
Oh really like offshore drilling?
No, I install and repair winches and deck equipment over seas.

I take care of the electronics and PLC systems.
 

·
Registered
Joined
·
741 Posts
No, I install and repair winches and deck equipment over seas.

I take care of the electronics and PLC systems.
Stop trying to make it sound like you work. Lol
 
1 - 20 of 23 Posts
Top