[Blown F-150]

Well crap... I went to install the winch and was pretty much all set and then found out I couldn’t mount one of the charge pipes on the CAC. The BOV hits the winch mount plate. I’ll have to reach out to Full Race and see what they think. It’s the mount they recommend, but they may have used the turbosmart BOV that is a bit smaller.

Sent from my iPhone using Tapatalk

 

[Blown F-150]

I shot a PM to @full-race geoff and hopefully he can help out. If not, I'll call the shop later this week to see what we can figure out.

 

[Blown F-150]

Waiting to hear from FR, shot them a email with some pics to look at.

In the meantime I wanted to get at least something done.

Installed new cones on the intake and ordered up a decent first aid kit and winching recovery gear.

Sent from my iPhone using Tapatalk

 

[Blown F-150]

Full Race is sending me out a modified elbow to work with the winch mount and the Tial BOV. Looks like they didn't test fit the CAC with the Tial or eBOV elbows to checlk for fitment. So if anyone else is looking at doing this, go with the Turbosmart BOV.

 

[Blown F-150]

Built right industries bed rack system and rear seat latches ordered up.


Sent from my iPhone using Tapatalk

 

[Blown F-150]

Decided to take some time off next week to get some stuff done on the truck. I will get some pictures up of all the goodies going in. Full Race CAC elbow and BuiltRightIndustries Bed Rack system should be here by Friday.

I also went and picked up the Power Stop rotors I ordered a while ago and also grabbed a mount and handle holder for the Hi-Lift Jack.

So it may be a bit ambitious, but the goal would be to:
- Install the winch
- Install the Fox 2.0's
- Get an alignment
- Modify bed rack so I can access my 12v/5v outlets
- Install bed rack system
- Mount Jack, Fire Extinguisher, Axe, Hatchet, Sawzall, First Aid Kit and RotoPax Gas can on racks.

 

[Blown F-150]

Ordered up a set of "raptor" grill lights, thanks @rbrown for the info.

Thanks to a clearance sale at a online store, I ended up ordering up everything I need to get a rack installed above the bed. This would be to mount the Roof top tent on top of or bike racks, cargo basket, etc. All Yakima stuff, so should be plenty strong enough for what I need. I doubt I'll see these parts by next week, but fingers crossed.

Also grabbed some Penzoil Platinum to get a oil change done too while I'm at it next week.

 

[Blown F-150]

Full Race custom elbow showed up today, so I took an hour this afternoon to get the winch mount installed to make sure all was good.

Hope to get the winch installed this weekend


Sent from my iPhone using Tapatalk

 

[Blown F-150]

Bed Rack Panels also showed up late this afternoon. Things are starting to pile up in the garage and the Wife is asking questions, lol.

 

[bespurcell]

Bed Rack Panels also showed up late this afternoon. Things are starting to pile up in the garage and the Wife is asking questions, lol.

Sounds like my wife. lol

 

[TX-Ripper]

Sounds like my wife. lol

operation new hiding place needs to jump into action...

 

[Blown F-150]

operation new hiding place needs to jump into action...

I just try to get the stuff installed before she see's it.

 

[RMB_Ryan]

I just try to get the stuff installed before she see's it.

Haha. I know the feeling man. My wife’s in Aruba and must have seen an Instagram post of what I was up to on Friday. Of course she commented.

 

[snakebitten]

The modern world is tiny. The distance from Jersey to an island in the Caribbean is about 60 milliseconds. Lol

Sent from my LG-H871 using Tapatalk

 

[Blown F-150]

Coil-over install may have to wait. We'll see when these show up. I couldn't say no for the price.

https://www.ebay.ca/itm/132567163095?ul_noapp=true

 

[RMB_Ryan]

The modern world is tiny. The distance from Jersey to an island in the Caribbean is about 60 milliseconds. Lol

Sent from my LG-H871 using Tapatalk

I’m flying out now for two days. Unplanned.

 

[Blown F-150]

I’m flying out now for two days. Unplanned.

I hope it for something fun!

 

[Blown F-150]

I was able to get the winch in tonight. It was a bit of a fight to get the couplers back on the CAC and the winch was a bit larger than the WARN that Full Race used. I had to space up the CAC bracket to clear the free spool lever.

The control box will need some more attention for a proper mount, for now it’s safe and out of the way.



Sent from my iPhone using Tapatalk

 

[Blown F-150]

I was able to get the winch in tonight. It was a bit of a fight to get the couplers back on the CAC and the winch was a bit larger than the WARN that Full Race used. I had to space up the CAC bracket to clear the free spool lever.

The control box will need some more attention for a proper mount, for now it’s safe and out of the way.



Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

 

[hodgexj1996]

Man that's a tight squeeze! Love the way it's comin together.

Sent from my P00I using Tapatalk