F150 Ecoboost Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
I have a 2011 f150 crew cab with a 3/5 djm drop kit , im hitting the bump stops too much , if i replace the djm shackle with the stock one will it raise the rear end too much , id be happy with an inch or 1 1/2 at the most . Please help
 

Attachments

·
Registered
Joined
·
1,529 Posts
I have heard of people cutting the bump stop down quite a bit. It will give you more clearance, and still provide some protection.

SPPD
 

·
Registered
Joined
·
11 Posts
Discussion Starter #4
the alignment was not hard , the pinion angle is really close , i just get a slight vibration at around 2 - 10 mph and then it goes away
 

·
Registered
Joined
·
550 Posts
I think replacing the DJM shackle with the longer oem shackle would lower the truck another inch or so, not raise the truck.
 

·
Registered
Joined
·
7,424 Posts
Hope you're changing out those wheels soon....
 

·
Registered
Joined
·
839 Posts
I have the djm 4/6" drop with BellTech lowering shocks in the rear. I've hit the bump stops once in a year.

My kit came with very thin replacement bump stops
 
1 - 7 of 7 Posts
Top