F150 Ecoboost Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
9,598 Posts
FYI, these are easily modified to adapt to the SCT livewire.

Cheap mod, much cleaner interior!

Land vehicle Vehicle Car Steering wheel Auto part
 

·
Registered
Joined
·
361 Posts

·
Vendor
Joined
·
1,529 Posts
Pinero61, is that the dash pod with the adapter? I need to get rid of the suction mount for the SCT Livewire
From my understanding, you will need the CTS adapter, but it does need some bits to be trimmed off of it to get it to work. We haven't done it ourselves, but probably should.
 

·
Registered
Joined
·
9,598 Posts
Yes, you will need the adapter and a roll of automotive grade double sided tape.

Simply trim the mounting tabs off of the adapter, and use double stick tape (or Velcro) to mount the SCT device. From start to finish, this may take 30 minutes.

EDIT: be sure to mount the SCT device high enough, so that the photo cell on the back still catches light for the auto dim function.
 
  • Like
Reactions: Robfx4
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top