F150 Ecoboost Forum banner
81 - 100 of 1,140 Posts
Image

The systems are different for sure. 2012 system y’s after the cats. Where in the newer trucks 2015 and up it’s got the cats in the y. I would buy it and make it fit personally if it were me. Don’t know how much of project you’re looking for….

But it honestly looks like they the exact same on the pipes you’d need….
 
owns 2017 Ford F-150 Lariat
Discussion starter · #82 ·
View attachment 195359
The systems are different for sure. 2012 system y’s after the cats. Where in the newer trucks 2015 and up it’s got the cats in the y. I would buy it and make it fit personally if it were me. Don’t know how much of project you’re looking for….

But it honestly looks like they the exact same on the pipes you’d need….
I’m 100% positive 2012 is the same as 2015+ from the downpipe back.
here is a 2012 f150 exhaust, I see what you’re saying about the downpipe. That’s ok though, I’m keeping my stock downpipe.
Image
 
Discussion starter · #84 ·
The drawings are not accurate, just used as a reference for parts. The exhaust is very different. 21+ have changed.

There are a few companies that make a kit which works for 15-24.

COBB makes a nice unit.
Then why do some exhaust systems for sale on like American trucks etc say 15-24?
 
Discussion starter · #86 ·
Hey guys… so my CVF intercooler will not fit my 2022 f150. The connection to the cold side won’t work, the elbow that came with the Intercooler is not long enough to reach the plastic pipe on my truck. Any thoughts? If I truly can’t make it work, I’ll be selling it and getting the V2. The V2 Titan is made for 2015-2023. The regular Titan is 2015-2020
 
Maybe a cold side pipe might fit. Maybe reach out to CVF if not someone will buy your old intercooler.
 
owns 2017 Ford F-150 Lariat
  • Like
Reactions: boostkingMatt
Discussion starter · #91 ·
The drawings are not accurate, just used as a reference for parts. The exhaust is very different. 21+ have changed.

There are a few companies that make a kit which works for 15-24.

COBB makes a nice unit.
You were right. I tried that Full Race exhaust and I found out the differences very quickly. Anyone want a full race exhaust? It has a brand new resonator with it the guy never used.
 
You were right. I tried that Full Race exhaust and I found out the differences very quickly. Anyone want a full race exhaust? It has a brand new resonator with it the guy never used.
That’s too bad.
 
owns 2017 Ford F-150 Lariat
Discussion starter · #94 ·
Worked a deal with Jason at CVF and I’ll do a video on my YouTube of their high mount intercooler install and review in exchange for 50% off. Cannot wait!
 
Worked a deal with Jason at CVF and I’ll do a video on my YouTube of their high mount intercooler install and review in exchange for 50% off. Cannot wait!
That’s a good deal!
 
owns 2017 Ford F-150 Lariat
  • Like
Reactions: boostkingMatt
Discussion starter · #96 ·
That’s a good deal!
Just need to figure out the exhaust situation. I’d really like a Gen 3 raptor exhaust so it can be equal length. But I may just have to settle with the classic Ecoboost sound.
 
Just need to figure out the exhaust situation. I’d really like a Gen 3 raptor exhaust so it can be equal length. But I may just have to settle with the classic Ecoboost sound.
Pay to play. I don’t blame you for not wanting to spend as much this time.
 
owns 2017 Ford F-150 Lariat
  • Like
Reactions: boostkingMatt
Hey guys… so my CVF intercooler will not fit my 2022 f150. The connection to the cold side won’t work, the elbow that came with the Intercooler is not long enough to reach the plastic pipe on my truck. Any thoughts? If I truly can’t make it work, I’ll be selling it and getting the V2. The V2 Titan is made for 2015-2023. The regular Titan is 2015-2020
The v1 should fot the 22, id look for a new coupler boot
 
Discussion starter · #99 ·
The v1 should fot the 22, id look for a new coupler boot
Read my later posts. It would probably have fit with a different boot. The v2 uses the stock boot. However, I have a high mount intercooler coming.
 
I was about to suggest other silicone piping suppliers, that sell 45 degree bends with long in/out lengths for trimming. But you have solved the problem! KM
 
81 - 100 of 1,140 Posts