Oil leak rear pinion... From the nut?
1 - 4 of 4 Posts
Joined
·
2,389 Posts
Joined
·
694 Posts
The oil will come out through the seal which goes around the pinion shaft. It could look like it is coming from the nut but it's not. Can't be because the shaft is solid.
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
What Mileage Do You Change Spark Plugs?
F150 Ecoboost MaintenanceWondering at what mileage everyone changes spark plugs? Mine is 2018 2.7L with 25,400 miles , no tune run 87 octane gas.- 76
- 4K
-
tennred · updated
-
Oil/Burning smell in cabin after k&n CAI install
F150 Ecoboost MaintenancePut a k&n cai on my 2013 3.5 screw and after a few minutes of ripping around the neighborhood I got a somewhat strong oil smell coming through the vents. No problems other than that, anyone have same experience or know what could’ve caused it? —also noticing a ticking sound that I didn’t...- 10
- 290
-
Sparky223 · updated
-
High pressure pump wiring harness
F150 Ecoboost MaintenanceHi guys, I changed the plugs on my 13 ecoboost today. Unfortunately on the back one on driver's side I was dumb enough to try and fit under the high pressure pump connection. Well it broke and I can't seem to find the replacement part for the connector anywhere online. Any help would be...- 4
- 116
-
Changing battery type on 11-14 with Forscan
F150 Ecoboost MaintenanceI know the newer trucks let you change what type of battery using Forscan, but I have not found anything about that for the 11-14 trucks and do not see anything in the As-Built spreadsheet. Does anyone know if there is a way to switch it over to an AGM type battery?- 12
- 387
-
mass-hole · updated
-
Ecoboost misfire, shutter, and loss of powe
F150 Ecoboost MaintenanceHave a used 2012 3.5 Ecoboost crew cab with 60,300 miles. Purchased 6 mos. ago with 54,000 miles. Have a 1 year bumper-to-bumper warranty and a 2 year/100,000 year engine warranty. I have experienced the dreaded misfire shutter and loss of power (CAC issue). I am taking the truck next week in...- 27
- 23K
Join now to ask and comment!