You and me both, but no, it wont fit, and I haven't run into an aftermarket one.

 

Why won't the raptor grill fit. I heard it's too wide. What is you cut it would that work.

 

It's not the width that's a problem. It's our hood.

I've seen people get a raptor hood and grille, and the bolt right up. The only issue is that our fenders don't quite match up to the body line on the raptor hood.

I'll post pics when I find them.

 

I've done quite a bit of searching and haven't found a grille that has that Raptor look other then the "OOOO" one. I'm positive if someone made a similar aftermarket grille, it would sell like hotcakes.

 

It'll bolt right in, our doesn't match up to it. You have to swap hoods too.

 

You pretty much have two choices. Replace the grille and hood, or cut the raptor grille to fit in the stock shell.

 

<img src="http://www.f150ecoboost.net/forum/attachment.php?attachmentid=5525"/><img src="http://www.f150ecoboost.net/forum/attachment.php?attachmentid=5526"/> You pretty much have two choices. Replace the grille and hood, or cut the raptor grille to fit in the stock shell.

Thanks for the info. I will look into that now.

 

Or start fabricating.

 

Your looking at some major fab work right there. It would be nice if someone made a ABS peice like that for people who want the raptor grille.

Replacing the hood + grille and then getting the hood rolled at a body shop to match the 150 lines is the easiest way to go. Getting it cut to fit.... Labor charges probably redic.

If you're good with a dremmel and a saw the cut style wouldn't be too bad. I was considering doing it myself, but I think it looks kinda tacky. I like my c-clamp grille.

 

Replacing the hood + grille and then getting the hood rolled at a body shop to match the 150 lines is the easiest way to go. Getting it cut to fit.... Labor charges probably redic.

 

Incase anyone was wondering about what this would cost... approx $1,700. This would be with me providing the Raptor hood and grille assembly.

http://

 

Thank me later https://www.facebook.com/photo.php?fbid=10150305949855839&set=a.%3Ca+href%3D%27http%3A%2F%2Fwww.f150online.com%2Fforums%2Fvindecoder.php%3Fvin%3D10150127282820839%27+rel%3D%27nofollow%27+class%3D%27vin_code%27%3E10150127282820839%3C%2Fa%3E.294477.46129275838&type=1&theater

 

Wooooo, that thing is ugly....

 

09 12 Ford F 150 Black Carbon Fiber Look Raptor Style Full Replacement Grille | eBay

 

09 12 Ford F 150 ABS Black Raptor Style Full Complete Billet Grille Shell | eBay

 

Raptor Fiberglass

 

Fiberwerx.com.... Best place for raptor conversions. I actually rather how their bubble fenders for the f150 look more than the actual raptor.

 

I found this grill on eBay it bolts right in you just have to take some parts off your factory grill and fight to get it in cause it is straight and not curved like it needs to be

But it is the oooo one but I still have a few people ask me about my raptor is and feel silly when in like it's not a raptor

 

Could just buy a raptor throw a twin turbo kit on it and presto!!

 

Raptor is so wide, drives like a boat, and has a poor towing rating. I like mine to feel like a truck -- but I'm definitely on the "give me the raptor grille and hood" bandwagon, they're badass looking, but by no means do I wish my truck was a raptor. If I wanted a raptor, I would have bought one -- not any cheaper than my FX4. The raptor guys just like to do the "hey look at me I bought a grocery getter that can jump over ****". If they come out with a V8 ecoboost raptor, count me in, in a few years, but if I'm to have only one truck, FX4 is what it'll be.

 

Here ya go, break open the piggy bank... Enjoy
http://www.f150ecoboost.net/forum/32-boost-bars/4991-raptor-style-grille-kit-normal-f150-update.html

 

If anyone is interested in a Raptor grill PM me

 

I wish I had known u had one available earlier, I just purchased a new oem raptor grille for $520 last week.

 

Pm sent

 

Bought an oem Raptor grille, this is gonna look soooo cool once reider starts manufacturing the hood cap and I get it painted &#55357;&#56846;
Anybody know how to remove the tabs on the stock grille without breaking them??

[URL=http://s903.photobucket.com/user/asvpab/media/20140911_175344_zpsnp2k61v0.jpg.html][/URL]

[URL=http://s903.photobucket.com/user/asvpab/media/20140911_1801430_zpsuoxb0eje.jpg.html][/URL]

 

Actually guys if you go over to www.boost-bars.com those custom fit raptor grills are coming in November from reider03! He is a member on here!

 

It's comin....

 

Still have this raptor grill, PM if interested