F150 Ecoboost Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
82 Posts
Discussion Starter #1
Just got my ELM327 and installed torque pro and did quick little run. On WOT I can get 15-15.5 psi and my truck is bone stock, is this normal? I tryed searching some of the forums and people are posting 12-13 stock? Truck is a 2013 with the latest TSB for the misfire / condensation and 6000km (3700 miles).
 

·
Registered
Joined
·
868 Posts
sounds about right the 2013 models have a different turbo than the 11-12 models and it is slightly larger
 

·
Registered
Joined
·
182 Posts
My 2013----with latest flash (older new style CAC) hits 14.5 max. I wouldn't complain with more power, lol.
 

·
Registered
Joined
·
750 Posts
With my 2013 I was monitoring it with the Torque Pro App I was getting around 14 I think at most
 

·
Registered
Joined
·
475 Posts
Mine would peak at about 13.5-14 but would only hold about 12, mine is 2012. 91 canned tune upped that about 2-3 psi.
 

·
Registered
Joined
·
216 Posts
It could be that the new tune revision runs more boost and less timing resulting in very similar power.

On my focus 25psi on race gas with 22-23 deg timing resulted in 560whp. 93 octane tune ran 27-28 psi and 15 degrees making 538whp.
 
1 - 9 of 9 Posts
Top