F150 Ecoboost Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
903 Posts
Discussion Starter #1 (Edited)
This is the build thread for my truck details are as follows:

2013 f150 4x4
XLT
Sterling Grey
Supercrew

First round of mods are to the Suspension, Wheels, Tires:
Suspension - 6" Rough Country Lift Kit
Wheels - 22x11 Fuel Hostage, Powder Chrome Finish
Tires - 325/50/22 AMP Mud Terrain

Future Plans:
Drilled and Slotted Rotors
Hawk 5.0 Pads
Clazzio Leather Seat Upgrades
4.56 Gears
Alpine 9" DVD
Alpine soundsystem w/ subwoofer
Replacement/Upgraded Strut
Firestone Ride Right Air Bags
Westin HDX Gril Guard or ADD Rancher
LED Rock Lights
LED Bed Lights
LineX

I will mention that I've been researching this for about a year, but dreaming about a truck like this since I was a youth. It's time to turn some dreams into reality. We all know how this goes, these trucks are a lot of money, the mods are a lot of money and I fully intend to run this one until the wheels come off. This is the keeper.

First round of mods are on order, I could not stand the stock height any longer, and could not stand the Goodyear tires that it came from the factory with.

Stay tuned....

Tires are here :)
 

Attachments

·
Registered
Joined
·
903 Posts
Discussion Starter #5
Pictures of the stock truck to come... I'm still waiting on parts, I will take pictures of those, as they arrive. Believe me, I want to see the pictures too....

Thanks,
JSM
 

·
Registered
Joined
·
903 Posts
Discussion Starter #6 (Edited)
Tire Measurements and Before Lift Truck Height Measurements.
Tires are true to the advertised width and height. Width 13", Height 34.8"
Truck Height Prior to Lift Kit, Front 17", Rear A Hair Under 21"

20140718_124438.jpg 20140718_124441.jpg 20140718_124534.jpg 20140718_124615.jpg 20140718_124637.jpg 20140718_124726.jpg 20140718_124756.jpg 20140718_124814.jpg 20140718_124821.jpg 20140718_124841.jpg 20140718_124847.jpg 20140718_124910.jpg 20140718_124923.jpg 20140718_124952.jpg 20140718_125438.jpg 20140718_125826.jpg 20140718_125829.jpg
 

·
Registered
Joined
·
1,546 Posts
Going to be a nice build. Post up your fender measurements (from middle of wheel well to ground) before and after if you would. Congrats on the truck!!
 

·
Registered
Joined
·
903 Posts
Discussion Starter #9
Well, got the lift scheduled to go on first week of August and after inquiring about a few different brands, the installer still recommended Rough Country. So, that's what I'll be staying with. Install will be occuring at Appalachian Off Road -. Wheels should be here tomorrow and pics to come, assuming the Fedex delivery makes it as scheduled.

I'm getting excited.

-JSM
 

·
Registered
Joined
·
903 Posts
Discussion Starter #10
Going to be a nice build. Post up your fender measurements (from middle of wheel well to ground) before and after if you would. Congrats on the truck!!
Center of wheel well front = 37.5"
Center of wheel well Rear = hair under 40"
 

·
Registered
Joined
·
903 Posts
Discussion Starter #11 (Edited)
Got the wheels partially in....
Got a Diablosport Trinity Tuner ordered
Got 4.56 gears ordered

Pics of wheels and I must say, they are heavy as ****! And, so much better looking in person. Extremely pleased....

Of note:
Wheel width outside lip, to outside lip is 12", not the 11" advertised.
 

Attachments

·
Registered
Joined
·
3,147 Posts
Got the wheels partially in....
Got a Diablosport Trinity Tuner ordered
Got 4.56 gears ordered

Pics of wheels and I must say, they are heavy as ****! And, so much better looking in person. Extremely pleased....

Of note:
Wheel width outside lip, to outside lip is 12", not the 11" advertised.
Those are perty sweet rims!
 
1 - 15 of 15 Posts
Top