F150 Ecoboost Forum banner
Cancel
Create thread New Garage Forums

Towing

Jump to Latest
1 - 20 of 36 Posts
#2 ·
All day long, lockout higher gears and it will tow it no problem all day long. Keep the revs up and it will do just fine.
 
#4 · (Edited)
WesleyE said:
I'm not sure what you mean lockout higher gears
Click to expand...
All day and twice on Sunday.
Here's a larger example and this is with 331s
Image


The toggle switch on your gear selector, toggle down to lock out 6th. Depending on your rear end and how fast you drive, you may be able to get away with just 6th, but it'll probably be happier in 4th.
Image
 
#5 ·
The lock out 6th (and maybe 5th) is to keep the RPM’s up, which means the turbo won’t be turbo-ing as much. Less turbo-ing means less heat in the engine which means happier towing.
I think… 🤔

Regardless, your truck will tow fine.
 
Discussion starter · #7 ·
Justinjs said:
All day and twice on Sunday.
Here's a larger example and this is with 331s
View attachment 205875

The toggle switch on your gear selector, toggle down to lock out 6th. Depending on your rear end and how fast you drive, you may be able to get away with just 6th, but it'll probably be happier in 4th.
View attachment 205874
Click to expand...
Mine doesn't have that switch as far as i know. I know there is a tow button on the gear shift which is between the seats not on the column
 
#12 ·
It definitely will. Didn’t the 12’s in particular have a higher tow rating than other years? Probably thinking wrong 🤔That’s a 7x18’ trailer if I remember correctly and idk how much bikes weigh but a Tacoma might be comparable. Towed no problems, not super far but hilly. Also a 2012 XLT.
Image
 
#15 ·
Just for more "info" on my personal towing experience, I'm old, so I have "been there and done that" experience to look back on with this subject.. :coffee:

Towing with the Ecoboost was yet another new experience I had to learn however.. So, since 2014, I have been learning how this truck likes to tow! o_O I think I have it "dialed in" now, but there is always room to "learn more". :cool:

Like was said already, you need to use the 6 gears to keep the engine in it's "happy" power band.. Not it's "Eco" mode...

Low rpms when you need power, is the recipe for an overheated engine. Bottom line... These Eco's like it in the mid to upper 2-3,000 rpm range. I like mine in the 2200 rpm range when just cruising down on a flat hwy going about 65 mph.

For my truck, this is in 5th gear. I lock out 6th for the most part unless I'm going down hill and my speed can be kept around the 65 mph mark without having to ride the brakes or even touch them..

I only use the "tow/haul" button when cruising on the flats. This is because when you hit the brakes, the trans wants to downshift. This helps a lot when you need to slow down in a hurry, or just for the up coming stop light while towing..

You also don't want to ride the brakes when going down hill... This is probably the most critical part of towing.. You over heat the brakes, there ain't no more options if you are still bombing down the road, or that slow moving car is in front of you! :eek:

This is when I turn OFF the T/H mode and then use my +- button to control my down hill speed. I try to keep the rpms in the low 3000 range and just TAP the brakes as needed... It's a game you have to learn how to play, just like poker...

If my rpms are too high, I'll hit the brakes hard to slow down quickly (make sure no one is ridding your a$$ at the time!) Then let off and let the speed gradually go up again. The longer you keep off the brakes, they have time to cool down and when you are going too fast again, repeat. If you just ride them to hold a specific speed, you will boil them in a couple of minutes and then you have zero brakes!

Anyway, I've rambled on for way too long.. If you want more info, PM me and I can give more of my "experience" doing this thing.. :)

Mitch
Image
 
Discussion starter · #16 ·
srs1990 said:
It definitely will. Didn’t the 12’s in particular have a higher tow rating than other years? Probably thinking wrong 🤔That’s a 7x18’ trailer if I remember correctly and idk how much bikes weigh but a Tacoma might be comparable. Towed no problems, not super far but hilly. Also a 2012 XLT. View attachment 205878
Click to expand...
Thank you
Mitchf150 said:
Just for more "info" on my personal towing experience, I'm old, so I have "been there and done that" experience to look back on with this subject.. :coffee:

Towing with the Ecoboost was yet another new experience I had to learn however.. So, since 2014, I have been learning how this truck likes to tow! o_O I think I have it "dialed in" now, but there is always room to "learn more". :cool:

Like was said already, you need to use the 6 gears to keep the engine in it's "happy" power band.. Not it's "Eco" mode...

Low rpms when you need power, is the recipe for an overheated engine. Bottom line... These Eco's like it in the mid to upper 2-3,000 rpm range. I like mine in the 2200 rpm range when just cruising down on a flat hwy going about 65 mph.

For my truck, this is in 5th gear. I lock out 6th for the most part unless I'm going down hill and my speed can be kept around the 65 mph mark without having to ride the brakes or even touch them..

I only use the "tow/haul" button when cruising on the flats. This is because when you hit the brakes, the trans wants to downshift. This helps a lot when you need to slow down in a hurry, or just for the up coming stop light while towing..

You also don't want to ride the brakes when going down hill... This is probably the most critical part of towing.. You over heat the brakes, there ain't no more options if you are still bombing down the road, or that slow moving car is in front of you! :eek:

This is when I turn OFF the T/H mode and then use my +- button to control my down hill speed. I try to keep the rpms in the low 3000 range and just TAP the brakes as needed... It's a game you have to learn how to play, just like poker...

If my rpms are too high, I'll hit the brakes hard to slow down quickly (make sure no one is ridding your a$$ at the time!) Then let off and let the speed gradually go up again. The longer you keep off the brakes, they have time to cool down and when you are going too fast again, repeat. If you just ride them to hold a specific speed, you will boil them in a couple of minutes and then you have zero brakes!

Anyway, I've rambled on for way too long.. If you want more info, PM me and I can give more of my "experience" doing this thing.. :)

Mitch
Image
Click to expand...
thank you
 
#17 ·
Mitchf150 said:
Just for more "info" on my personal towing experience, I'm old, so I have "been there and done that" experience to look back on with this subject.. :coffee:

Towing with the Ecoboost was yet another new experience I had to learn however.. So, since 2014, I have been learning how this truck likes to tow! o_O I think I have it "dialed in" now, but there is always room to "learn more". :cool:


If my rpms are too high, I'll hit the brakes hard to slow down quickly (make sure no one is ridding your a$$ at the time!) Then let off and let the speed gradually go up again. The longer you keep off the brakes, they have time to cool down and when you are going too fast again, repeat. If you just ride them to hold a specific speed, you will boil them in a couple of minutes and then you have zero brakes!
Mitch
Click to expand...
Well said.
Same principle with a commercial truck on downhills, as far and 'how' to brake-regulate your speed.. never stay on the brakes. short bursts of heavier braking will keep them much cooler than riding the pedal for an extended seconds of time..

@Mitchf150 [roughly] what kind of fuel economy do you get when towing with your 6 spd F150? I recently picked up a '20 F150 3.5eb with 10 spd, but I've not hooked up my 25ft Coleman Dutchmen TT yet.. Just curious
 
#18 ·
GeriatricGinger said:
@Mitchf150 [roughly] what kind of fuel economy do you get when towing with your 6 spd F150? I recently picked up a '20 F150 3.5eb with 10 spd, but I've not hooked up my 25ft Coleman Dutchmen TT yet.. Just curious
Click to expand...
I get roughly 9-10 mpgs. I do a combo of flat running and going over a pass or two. Not much altitude here in WA state over I-90, but there are multiple passes to get over, so it all averages out I guess. Nothing over 5% grade.

If I hit any kind of head wind, I have to go in 4th and just ride it out so I don't get too hot. Once out of the boost, it cools down fast. Get into the boost and it gets hot.:confused:

As long as I can keep the boost below 5 psi, it does the best mpg and stays the coolest. Once over 10 psi, and you are just dumping fuel in and the temps rise fast. After about 4-5 minutes, it's over 225* and the fans kick into HIGH, so I try to keep it around 220* as most.. Most I have gotten it was 230*, but I got caught in the passing lane by a greedy semi that wanted to mess with me... I got around him, but the Eco had to work harder than I usually like to push it.. :cool:

Mitch
 
  • Like
Reactions: Justinjs and WesleyE
Save
Reply Quote Like Like
Discussion starter · #19 ·
Boatwaco said:
The lock out 6th (and maybe 5th) is to keep the RPM’s up, which means the turbo won’t be turbo-ing as much. Less turbo-ing means less heat in the engine which means happier towing.
I think… 🤔

Regardless, your truck will tow fine.
Click to expand...
How fast do I need to go while towing and I guess I need a trailer break control in the truck
 
1 - 20 of 36 Posts
About this Discussion
35 Replies
13 Participants
Last post:
woohabs
F150 Ecoboost Forum
posts
678K
members
53K
Since
2012
F150Ecoboost.net is the best Ford F150 Ecoboost Forum with discussions on 2011+ F150 Ecoboost Trucks. Discuss performance mods, towing questions, wheels, tires, lift kits, and much more!
Full Forum Listing
Explore Our Forums
F150 Ecoboost Performance General F150 Ecoboost Discussions F150 Ecoboost Problems 2nd Gen F150 Ecoboost F150 Ecoboost Builds