F150 Ecoboost Forum banner
Status
Not open for further replies.

HOW TO: 2015+ F150 Cabin Air Filter Replacement

44K views 29 replies 16 participants last post by  Bubbabiker  
#1 ·
For those of you that don’t know, the 2015+ model year F150’s have incorporated a cabin filter unlike the 1[SUP]st[/SUP] gen Ecoboost trucks. Here are some instructions to removal and installation along with some videos in case you are more of a visual learner.

Parts:
New cabin filter (Motorcraft FP-79; or equivalent)
7mm socket
Socket wrench
Trim removal tools (optional but helpful)
Image


Removal and installation of glove box and trim pieces may be different because of model year and/or trim package.

1 Disconnect damper piece on the right side of the glove box by sliding it forward then pulling it out from the side of glove box

2 Find the tab on each side of the glove box and push in simultaneously on both tabs to drop the glove box

3 Pull out and down on the rubber trim piece located above the glove box pocket (For XLT and lower models)

3.1 For Lariat and up trim models, follow these steps:

3.2 Insert the tool with the split end in the middle of the wood trim piece
Image


3.3 Pry down on the tool with the split end and insert in trim removal tool with a 90° hook/bend.
Image


3.4 While prying down with the split end tool, slide the hook tool to the far right of the trim piece and pull towards you. Do this all the way from right to left for the whole trim piece.
Image


4. Remove two 7mm bolts exposed on the door pocket tabs
Image


5. Grasp the bottom front of the glove box pocket and work it out straight out

6. Disconnect glove box sensor plug on the left side of the glove box pocket

7. Pull two tabs on the side of the honeycomb door panel off then swivel the door down to remove it.
Image


8. Remove old cabin filter and replace with new, ensuring the air flow arrow is pointed down
Image


9. Repeat steps in reverse order to put everything back together.

Here is a cabin filter with 12K miles on it from a non-smoker.
Image





 
#2 ·
Thanks miles!

But you do realize that now you've simply increased your own torture for every future thread started that even remotely has anything to do with the interior cabin filter?

Still, the current membership is grateful. :)

Sent from my SM-N950U using Tapatalk
 
  • Like
Reactions: milesej05
Save
#3 ·
That's pretty dirty for 12,000 miles. Where do you live?
I have 30,000km on myboriginal filter so I may change mine this summer

Sent from my SM-G930W8 using Tapatalk
 
Save
#4 ·
This is a pretty valuable write-up with included video/s......but it ticks me off so bad since it flaunts that the 2015+ have a filter and mine doesn't!!!! :mad::mad::mad:
That is my biggest gripe about the 09-14 models lack of an in-cabin air filter.

Then again, if that's my biggest gripe about my truck, then life is still pretty awesome! LOL
 
Save
#8 ·
#9 · (Edited)
SpaceAce, what is your relationship to Ford Parts Prime? In the 14 posts you’ve made you’ve mentioned them at least 5 times. Few people love their source that much.
 
  • Like
Reactions: mwemaxxowner
Save
#11 ·
Miles

Thank you for the thread. I'm rather surprised there is so much required to change a filter.

On other cars it's a 2- 3 minute task.

Then again changing headlight bulbs on Gen2 could be a lot simpler.
 
Save
#16 ·
My first one was around 30k, second one I did 11 months later. I am rarely at my farm with the truck due to work, but I drive thru several construction zone on the way to work.

I might start changing it twice a year since I am affected by allergies. It’s easy in the XLT and lower models because of the rubber trim.

It could have been easier if Ford would have done something to lower the filter box or even angle it downward. I’m not complaining though, my 2010 work truck doesn’t have a filter at all. I can tell the difference due to my allergies.
 
Save
#17 ·
It could have been easier if Ford would have done something to lower the filter box or even angle it downward.
They didn't do this so either;
1) The owner has to take it to the Ford Dealership and get charged for an hour of labor and a $25 dollar filter; or
2) The owner's A/C unit isn't blowing hot or cold air anymore due to the filter being clogged so they take the truck to the dealership and they get charged an hour of labor and a $25 dollar labor and an A/C recharge.
 
#22 ·
Just did mine on 18 stx. Only need 7mm. Took all of 10 minutes apart and back, and I didn't read the how to.. At 38000km it was starting to smell dusty, and visibly it was due. Replaced with a fram fresh breeze from Amazon. Air flow arrow points down.

Sent from my CLT-L04 using Tapatalk
 
#24 ·
#27 ·
Howdie All,
Quick and hopefully easy answers for those who can - I have replaced the filter and now it doesn't really work. I made sure it is installed right...and even purchased another filter and I still smell all the stink that Vegas has that used to be filtered out. Could something be wrong with areas before the filter that can be checked? I can't find guidance....so I am here.
Thanks in advance for any help.
 
#28 ·
I am not under the impression that these filters were intended to filter odors per se. I believe their primary function is to filter out particulate matter which of course can carry odors. This said, when these things get dirty, particularly after a hard A/C use season they can very much smell like mold/mildew. When this happens changing them seems to make a pretty remarkable difference and things smell better.

It might be time to do a carpet and headliner cleaning.
 
Save
Status
Not open for further replies.
You have insufficient privileges to reply here.