F150 Ecoboost Forum banner
Status
Not open for further replies.

Forscan

28K views 77 replies 20 participants last post by  Grabber70Mach  
#1 ·
Got an iche to do a few Forscan mods-lol
Ordered the OBDII w/ cable & switch.
That should be here today! (is)
Can't wait to do the Bambi & Global mod-woop woop.
Anything else for the 14` XLT's?
I'm getting that "look" from the wife.....you better not fu** that truck up-stare>lol
Image


Sent from my SM-G965U1 using Tapatalk
 
#62 ·
I need to research what dongle to use.

Yes android. I am going to try to free version of torque. When i switch to sync 3, you can apparently put some gauges onto the sync 3 screen through android auto.
 
#63 ·
I actually have Carplay/Android Auto on my aftermarket deck. You got me thinking about getting some gauges on my deck with Torque pro on my 7" tablet. Only downfall is my 150GB of music on my phone, Sirius XM app, phone, text and Waze will be gone while that's up.
 
Save
#67 ·
Can still use a cheap old 7" tablet like I do for torque. If it's not hooked up to AA, it works just fine.
 
Save
#73 · (Edited)
Does anyone know if you can retrieve your KEY CUT CODE through forscan and PATS system or something? I am going to install remote start on my truck. I can program the keys myself, however the thing I cannot do is cut them myself. My Ford guy says I would need to have a 5 digit key cute code (this is not keyless entry code) to cut this and only the dealer can do this?

I already found the two places to change settings using froscan to enable remote start. The second one puts opitions under the SETTINGS line on the LCD screen between gauges on upper level trucks.
 
#74 · (Edited)
OBDLink has a 30% off coupon code on Amazon for those looking for a top of the line bluetooth/wifi adapater. The OBDLink MX+ and MX Wifi both work with the iPhone.

Code is: KN9DZ4W4

I am even thinking about scooping up another OBDLink MX+ so I can have one in the truck and Jeep.
 
  • Like
Reactions: Mikedick77
Save
#75 ·
Welp guys, tonight i plugged in the remote start, took about 5min behind glove box and then programmed it to work on Forscan...and it worked!

Truck is driving and starts so i dont think i messed anything up. I programmed a couple other things im going to mention in my thread.
 
Status
Not open for further replies.
You have insufficient privileges to reply here.